Order Online or Call (888)299-4882

Safety Supplies

Industrial Consumables

Janitorial Supplies

Office & Packaging

Specials



#volusion_ssl_seal { behavior: url(/a/iepngfix.htc); }


Home > Industrial Supplies > Fiberglass Fabrication
Chip Brushes Plastic Speaders
Laminating Rollers and Covers
Sort By:
Page of 1
Blue Cream Hardener, 4 oz Tube, each Evercoat Hi-Bond Boatyard Resin - 1 Quart
List Price: $4.99
Our Price: $4.99
Sale Price: $4.84
Savings: $0.15
List Price: $21.95
Our Price: $21.95
Sale Price: $21.29
Savings: $0.66
Blue Cream Hardener, 4 oz Tube, each Evercoat Hi-Bond Boatyard Resin - 1 Quart
• Quick hardening, non-separating, cream hardeners formulated for use with body fillers, specialty fillers and polyester finishing putties.
• Large quantities available.
• Call for quotation.
Weight: 4.000 lbs
3M Marine Adhesive Sealant Fast Cure 4000 - White, 10oz 3M 5200 Fast Cure Adhesive Sealant - White, 10oz
List Price: $21.99
Our Price: $21.99
Sale Price: $21.33
Savings: $0.66
List Price: $22.99
Our Price: $22.99
Sale Price: $22.30
Savings: $0.69
3M Marine Adhesive Sealant Fast Cure 4000 3M 5200 Fast Cure Adhesive Sealant
Gasket Sealant,  UV-Resistant Fast Cure 4000 UV,  10 oz.,  White,  Temp.
Range -40 to 190 Degrees F,  Specific Gravity -,  Viscosity -,  Full
Cure 24 hr.,  Application Time 20 min.,  Substrates Gelcoat,  Wood,  
Metal,  Rubber,  Plastics,  Aluminum,  Steel,  Stainless Steel,  ABS,  
Pine,  FRP,  One Part Sealant,  White,  Waterproof Seal,  Flexible,  UV
Resistant,  Weatherproof,  Sandable,  Will Not Yellow Like Urethanes,  
Cure,  Low VOC,  Less Than 1 Percent Non Shrinking and Non Saggin
3M 5200 is a single part sealant that cures to form a firm, rubbery waterproof seal. When fully cured, this high strength marine adhesive remains flexible and suitable for use where shock, vibration, shrinking or swelling are concerns.

Use 5200 on wood, fiberglass, hardware, motors, on fiberglass transoms, seams, joints, between struts, and planking stern joints. This permanent adhesive bonds and seals: fiberglass deck to hull, wood to fiberglass, portholes and deck fittings, motors on fiberglass transoms, under moldings, hull seams above and below water line, centerboard trunk joints, between struts and planking, stern joints and more.

Apply with a manual caulking gun. Sealant remains workable with a trowel or spatula for up to four hours, and won't sag or flow in vertical or horizontal seams.

6" PSA P1000 Grit Film, 40 Discs 6" PSA P1200 Grit Film, 40 Discs
Our Price: $25.99
Our Price: $25.99
6" PSA P1000 Grit Film, 40 Discs 6" PSA P1200 Grit Film, 40 Discs.
6" PSA P1000 Grit Film, 40 Discs.

- Polyester film backing for durability, flexibility and uniformity
- Micro-cut precision grains increase cut-speed and accuracy
- Advanced resin-over-resin design reduces shelling and
increases performance and durability
- Proprietary anti-clog technology reduces paper loading and
friction, as well as extends product life
- Patented SynWaveâ„¢ Technology simultaneously sands flat and
curved surfaces without gouging, which reduces finish sanding
up to 50%
- Smart-sized packs and simplified pricing
6" PSA P1200 Grit Film, 40 Discs.

- Polyester film backing for durability, flexibility and uniformity
- Micro-cut precision grains increase cut-speed and accuracy
- Advanced resin-over-resin design reduces shelling and
increases performance and durability
- Proprietary anti-clog technology reduces paper loading and
friction, as well as extends product life
- Patented SynWaveâ„¢ Technology simultaneously sands flat and
curved surfaces without gouging, which reduces finish sanding
up to 50%
- Smart-sized packs and simplified pricing
6" PSA P1500 Grit Film, 40 Discs 2-3/4" x 25 yds. PSA 150 Grit Gold Roll
Our Price: $25.99
Our Price: $25.99
6" PSA P1500 Grit Film, 40 Discs. 2-3/4" x 25 yds. PSA 150 Grit Gold Roll
6" PSA P1500 Grit Film, 40 Discs.

- Polyester film backing for durability, flexibility and uniformity
- Micro-cut precision grains increase cut-speed and accuracy
- Advanced resin-over-resin design reduces shelling and
increases performance and durability
- Proprietary anti-clog technology reduces paper loading and
friction, as well as extends product life
- Patented SynWaveâ„¢ Technology simultaneously sands flat and
curved surfaces without gouging, which reduces finish sanding
up to 50%
- Smart-sized packs and simplified pricing

3M 05954 Super Duty Compound - 1 QT USC24030GL
List Price: $39.99
Our Price: $39.99
Sale Price: $38.79
Savings: $1.20
Our Price: $59.99
Sale Price: $42.48
Savings: $17.51
3M 05954 Super Duty Compound US Chemical Duraglas
SUPER DUTY RUBBING COMPOUND is recommended for heavy aggressive
compounding of paint. Clings to paint surface. Remains wet on the job
with little or no mess. Maintains high rate of cut with constant
pressure. Buffs to high gloss with minimum swirl marks. For hand or
machine. Quart size
USC Duraglas Filler, One Gallon
Methacrylate Weld Bond Adhesive 7oz Evercoat Polyester Glazing Putty - 100407, Half Gallon, 5.5lbs
List Price: $49.95
Our Price: $49.95
Sale Price: $48.45
Savings: $1.50
List Price: $63.45
Our Price: $63.45
Sale Price: $61.55
Savings: $1.90
Methacrylate Weld Bond Adhesive 7oz Evercoat Polyester Glazing Putty - 100407, Half Gallon, 5.5lbs
is a non-sag, 2-component methacrylate adhesive system that bonds metal surfaces without the use of an external primer. This 100 percent reactive formula features glass beads for consistent bond line thickness. SEM Products Dual-Mix Weld-Bond adhesive is used to replace automotive quarter panels, door panels, roof skins, box sides, van sides, and other body sheet metal. Weld-Bond offers excellent environmental resistance and superior impact and peel strength. The original polyester glazing putty. Can be applied directly to bare metal, body filler, fiberglass and fully cured sanded top coats. Easily fills grind marks, pinholes, low spots and other minor imperfections. Contains ZNX-7? for superior adhesion to galvanized steel, bare steel, aluminum, SMC, E-Coat and OEM finishes. No shrinkage. Easy dry. Reduces risk of staining. Blue cream hardener included
Evercoat Skid-No-More - Gallon Evercoat 100574 White Marine Filler - 1 Gallon
List Price: $66.95
Our Price: $66.95
Sale Price: $64.94
Savings: $2.01
List Price: $69.95
Our Price: $69.95
Sale Price: $67.85
Savings: $2.10
Evercoat Skid-No-More - Gallon Evercoat 100574 White Marine Filler - 1 Gallon
Evercoat Everglass Short Strand Fiberglass Filler, Gallon Bondo® Fiberglass Resin, 404, 1 Gallon
List Price: $71.95
Our Price: $71.95
Sale Price: $69.79
Savings: $2.16
List Price: $79.44
Our Price: $79.44
Sale Price: $77.06
Savings: $2.38
Evercoat Everglass Short Strand Fiberglass Filler, Gallon Bondo® Fiberglass Resin, 404, 1 Gallon
Short strand, fiberglass reinforced body filler. High strength, high build and waterproof which makes it excellent for repairing holes, rusted metal, body seams and shattered fiberglass. Contains ZNX-7® for superior adhesion and corrosion resistance to bare steel, galvanized steel and aluminum. Blue cream hardener included
Bondo® Fiberglass Resin is the same high-strength polyester resin that is used to build most boats. Can be used alone or with fiberglass tape, cloth or mat to repair damaged fiberglass boats, snowmobiles, jet skis, bathtubs and showers.

Can also be used as a sealer on damaged and rotted wood. Seals concrete, is great on large or small metal rust-outs and joins most surfaces together while creating a strong and long lasting bond. Sandable in less than 2 hours. Compatible with all paints, including gel coat and marine paints. Waterproof. Includes Liquid Hardener.



3" Alum Zirconia QRC 24 Grit, box of 50 3M 05955 Super Duty Compound - 1 GAL
List Price: $90.19
Our Price: $81.99
Sale Price: $77.89
Savings: $12.30
List Price: $85.95
Our Price: $85.95
Sale Price: $83.37
Savings: $2.58
3" Alum Zirconia QRC 24 Grit, box of 50 3M 05955 Super Duty Compound
3" Alum Zirconia QRC 24 Grit, box of 50 Aggressive compound. Remains wet on the job with little or no mess.
Maintains high rate of cut with constant pressure. Buffs to high gloss
with minimum of swirl marks. Can be used by hand or machine
3M 36061 Xtra Cut Rubbing Compound - 1 GAL 3M 06086 Perfect-It Rubbing Compound - 1 GAL
List Price: $154.99
Our Price: $154.99
Sale Price: $150.34
Savings: $4.65
List Price: $159.95
Our Price: $159.95
Sale Price: $155.15
Savings: $4.80
3M 36061 Xtra Cut Rubbing Compound  - 1 GAL 3M 06086 Perfect-It Rubbing Compound  - 1 GAL
3M's best rubbing compound when looking for extra performance, extra
cutting, extra smooth handling, extremely easy to use and clean-up.
Unique formula quickly removes P1200 grade and finer sand scratches and
other surface defects
Buff to remove sand scratches completely - For faster cut and less
heat: Use 3M™ Superbuff™ III Wool Pad (3M-5703) or 3M™ Perfect-It™ III
Wool Compounding Pad (3M-5719) - To eliminate lint and achieve a finer
finish: Use 3M™ Perfect-It™ Foam Compounding Pad (3M-5737) - Work a 2’ x
2’ area at a time Suggested buffer speed: 1,200 – 2,000 rp
   
 
Our mission here at Beacon National Supply is to supply quality safety products provided by reputable manufacturers to businesses and individuals..
We offer excellent customer service with the most competitive pricing.